Features & Extras

– Stainless Steel Linear Rails – That’s right, no more worrying about rusty rails. You’ll still want to grease these rails, but you can do it at the end of your build.

– Linear Rail Mounting Bar – Our kit includes 5 custom 7H size linear rail mounting bar to secure the linear rails onto the extrusions, (no need to fiddle with tiny m2 nuts on a thin plastic part)

– Brass Heatset Insert Tool – We’ve included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.

– Pre-cut & Pre-wired – Our kit includes all necessary wiring: cut to just the right length and pre-crimped or soldered to their respective parts. See our supplementary wiring guide here.

– Two Types of Nuts – We’ve included both black oxide hex nuts and stainless square nuts in our kit, use whichever type you prefer.

– Partially Threaded Screws – The small pack of partially threaded SHCS screws (M3x30/x35) are for the mini-afterburner, they help reduce wear on the Guidler and Latch parts.

– Hex Wrenches – We found that 1.5mm hex wrenches wear out easily, so we threw in a bunch of them. However, you should definitely still buy a set of good quality hex wrenches.

– Threadlocker – We included a small tube of threadlocker. Use it on all the grub(set) screws.

– 2mm Drill Bit – Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

– RTV Glue – The included tube of RTV glue is used for securing the heatpad to the aluminium build plate. Check out this great video by Nero3D for assembling a safe build plate.

For more information: http://docs.ldomotors.com/voron/voron01

*Printed parts are excluded, please refer to our other listing on Voron 0.1 Printed Parts.*